Introduction: Amnesia: a K'nex Ride
This is Amnesia. It is a swinging pendulum ride. If you decide to build this please note that this is my design. You don't have to build the ticket booth and "Amnesia" card, as I did for detail.
Step 1: The Base.
Follow the pictures.
Step 2: Base Part 2
Step 3: Base Structure Support
Build this. Flexi Rods are optional. For detail.
Step 4: Base Structure Part 2
Build this. Flexi rods are optional.
Step 5: Motor
Flexi Rods are optional. Use the slower black motor. Please use the right amount of spacers!
Step 6: Pendulum Part
Build this. If you don't use the correct amount of pieces, each side of the arm will be uneven and would not work properly.
Step 7: Seating
Build this. USE ALL THE PIECES.
Step 8: Connecting Arm to Base.
You arent done yet. 2 more things. >:D.
Step 9: Weight Support
Build this. YOU NEED IT. ONE OF THE MOST IMPORTANT PIECES.
Step 10: Ticket Booth.
Tou can build this if you want. You don't need to do it, though. You can draw my "Amnesia" template or you can draw your own. Thank you.
We have a be nice policy.
Please be positive and constructive.