With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
With this guide you can transform an old telephone in a friendly device that uses your mobile phone.
Material: An old telephone. A 1cm piece of wood larger than your cell and the thickness of 18/20 mm. A piece of plywood the same size. A USB ...
Open the phone and remove everything you find inside.
Draw a rectangle with a pen the size of the piece of wood. In my case for a Galaxy S is 80x135. If you need to delete all ...
With the cutter or jigsaw removed the piece of plastic which will be glued a piece of wood.
Now precisely shaped hole that you made using a file and the piece of wood as a measure.
Place your phone in the center of the piece of wood and draw all around the profile sure to draw a little wider.
With the jigsaw cut out the inside, be precise in the cut.
Smoothed with sandpaper good for the inside that were cut. At this point you have to practice a slot to make room for the USB connector to charge ...
Take the piece of plywood and glue on the bottom of the piece of wood.
While everything dries prepare the USB ports. I took a laptop broke a piece of card with two ports, you must remove all the components soldered because the ...
Once cleaned and cut in the rear of the phone base to track and get an opening.
When you have done the opening, make a hole 4 mm in the base, bring it on the basis of the phone and punched too. Insert a long ...
Take the piece of wood that has been dried and sand it in all its parts. Then close the phone and placed the wood in the hole that ...
Reopen the phone, and with the hot glue to fix the piece of wood.
While waiting for the glue to cool, cut the extension cable and drilled on the side of the cave that you have done for the USB ports.
At this point you have to fill the conjunction of the piece of wood and the plastic of the phone. You can use a car body filler. When ...
Now your device is ready to be painted. For a better grip of the paint can first apply a primer for plastic.
When the paint has dried, insert the USB cable and peel a few centimeters. Use only the red and black wires. Locked with a cable clamp to prevent ...
Solder the two wires on the legs of the two USB ports. Follow the diagram and photos to weld them in the appropriate places. The red wire is ...
Now you can place the base on the screw, adjust the height by the end of the nut and lock it with another nut. With hot glue attach ...
Before closing the phone permanently glued to one of the old keys to close the holes that had remained open. At this point it is necessary to ...
Cut pieces of cardboard to be inserted at the bottom to calibrate the depth of the housing, then coated with a soft material on the bottom.
Well, the phone is finished, you just insert it into your cell.
Now think: beautiful and functional but the handsets where is? The handset has been done previously with this guide. If you want a touch of class you can ...
Smartphone for Seniors/Dummiesby msuzuki777
Binder clip cellphone standby dkfotog
cellphone stand by MAAC1
wet mobile phone repair how to Repair mobile phones Nokia, HTC, iphone, sonyericsson,...by benben247
35mm Slide Converter For Cellphoneby barkergk
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »