With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is my instructable on building a simple LED table that works and responds in an analog manner. It was to be built of individual pods with 4 LED's...
Supplies needed Panel *Most of the panel supplies can be skipped if you all ready have a ready built glass table with enough space below to contain...
Whooooops, for some reason I forgot the write-up for this section. So here goes! My glass was 30" by 48", so this dictates the size of the table. I...
I am not going to go into this too deeply, as a bunch of instructables describe building lab power supplies from computer power supplies all ready. B...
Ah yes, its pod building time! Now you will have to bare with me as I built the actual circuits over a year and a half ago. Little embarrassed to say...
This is a simple matter of laying out the LED's in a pleasing manner, mine was 5 rows of 9. Once the pattern was marked, I simply drilled a small...
Once again drilling holes, attaching pods, feeding the wires.
All wires fed through the holes Bundle the wires into groups Secure and neat, ready for test run!
Hook the negative leads to the ground. Hook the positive leads to the 12V Turn on - success
Here we have put the power supply in place Chiseled out a hole for the fan Drilled the hole for the switch and drilled a crappy hole ...
So, got a little cocky but luckily I caught my self. One of the pods stayed lit all the time. It took me an hour to figure out what was wrong, I had...
All is well, final assembly Fitted the board into the table Hook up all the wires Install the fan And screw in the 1"x1"boards to...
Remove these ads by
Signing Up
Not NiceInappropriateSpam47,429 views
155 favorites
Posted:
Sep 19, 2010
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »