Introduction: Analog Sensor Signal Conditioning Circuit

In this three part Instructable we look at how to design a signal conditioning circuit to increase the accuracy and resolution of your ADC sensor measurements. The signal conditioning circuit consists of a double pole active Sallen Key Low Pass Filter and a non-inverting op amp. The filter portion is meant to attenuate high frequency noise from your sensor signal to increase measurement accuracy. The amplifier portion scales the signal up to the full range of the ADC to ensure you are getting max resolution.

You can access the Eagle files on Github at: https://github.com/ForceTronics/Sallen-Key-Low-Pass-Filter-Design/tree/master

You can purchase a sensor signal conditioning circuit at forcetronics.com

Comments

About This Instructable

146views

8favorites

License:

More by ForceTronics:Removing Solder Bridges on Small PinsAnalog Sensor Signal Conditioning CircuitHow to Get More Functionality Out of Your Arduino Zero
Add instructable to: