Introduction: Analog Sensor(Moisture / Temperature) +NTP Clock , With ATmega328P

this project, esp8266 + ATmega328 use.

Moisture value, Temperature , NTP Clock

display possible to OLED,

and value send to Cloud Service.

# Youtube

https://www.youtube.com/watch?v=DFSB9XVi51M

# Parts

Analog- Soli Moisture Sensor

Analog Temperature Sensor : LM60BIZ

I2C 0.96 inch OLED display

# arduino Library:
Time: http://playground.arduino.cc/code/time

TimeLib

WiFiUdp

Adafruit_SSD1306

# Driver ,Git
https://github.com/kuc-arc-f/makeKuc-SNTP-Analgog-4


# related post:
Analog Sensor(Moisture / Temperature) +NTP Clock , with ATmega328P

http://knaka0209.blogspot.jp/2017/01/esp-wroom-02-36.html

Comments

author
Swansong (author)2017-01-09

Thanks for sharing. :) Just for reference if you would like to break down the steps into written instructions along with those progress/step photos so that others can replicate your projects then it will receive more attention from the community and be possible to be featured on the site. https://www.instructables.com/id/How-to-Create-a-Fe...