Step 5: Testing and conclusion

To test the system I saved the data using a program called Termite, then import this data at excel and plot the graphic to see how good my filter is. The results are amazing. Of course you can use the signal to drive a motor, or other things.

Any comments, any doubt, any information missing, just tell me and I correct it.

Please if you like this, rate.

Thank you all.
<p>Hello, First of all great work and thank you very much for sharing the knowledge. </p><p>I need to know a couple of things.</p><p>1. Are the angle measurements accurate. Does a 45 degree change show 45 degrees approxiamtely.</p><p>2. Up to what value of angle the device measure ? Is it capable of handling more than 90 degree angles</p>
<p>I made an equivalent tool in python that print real time data from ADXL345 accelerometer.</p><p><a href="https://github.com/mba7/SerialPort-RealTime-Data-Plotter" rel="nofollow">https://github.com/mba7/SerialPort-RealTime-Data-P...</a></p><p>may be it will be helpful for someone</p>
<p>is this possible to use only accelerometer for angle measurement.</p>
<p>It is possible to use only the accelerometer but the result may not to be so good.</p><p>It is recommended use both sensors.</p>
Nunchuck controller are use for what?? How can I use this, to combine with my pyranometer tracker?
Nunchuck controller has an internal integrated accelerometer.<br><br>You can use it for a variety of things, depend what are you doing or your need.
Desculpe-me, &eacute; que estou construindo um bicoptero e estou com um problema no equlibrio de todo o sistema, estudando seu codigo: angle_for_instructable.pde<br>N&atilde;o vi nenhuma linha para a execu&ccedil;&atilde;o dos motores que vc usou no seu rob&ocirc;.<br>estes comandos est&atilde;o em um outro arquivo a parte?<br>Obrigado pela aten&ccedil;&atilde;o.
The code link does not link to a .rar but to a .tmp file. Is the code link available somewhere else? <br> <br>Thanks, <br> <br>Jim
i need to build a human body sensor using an accelerometer and a gyroscope........and i am gonna use labVIEW as software for analysis.....can you please help me with the microcontroller part........should i go with lpc2138???<br><br>thanks
Is there any information about how that formula is derived, because I hate using things i dont fully understand
Read this instructable first, there is a plenty of information.<br><br>http://www.instructables.com/id/Accelerometer-Gyro-Tutorial/<br><br>Any doubt feel free to ask.
I mean the one to calculate the angle using accelerometers.
Sorry If i bother you but where can I buy the gyroscope device you used in your realization?
I bought this gyro at eBay. But is no longer available.
Thanks for the explanation. I&nbsp;was waiting for someone to do this.
Thanks, I'll need this for my next project.<br /> <br /> Justin<br />
Nice, xD<br />
When I try to download the .rar, all I get is a .tmp file. I have tried 3 different browsers, how does this work?
Try just renaming from .tmp to .rar

About This Instructable




More by otaviousp:CNC G-Code Interpreter using ProcessingHow to connect Arduino and RFIDAngle measurement using gyro, accelerometer and Arduino
Add instructable to: