How to make an Anglerfish mask

Step 4 Assemble electronics

I found 2 flashlights at the dollar store, and some decorative xmas LED's that fit around mini trees. I think the latter is pretty easy to make, I just found one that was pre-made.

I cut the flashlights threads off the cap, and saved the light portion. I spray painted the housing and reassembled the light potion.

I then soldered wires to the contacts.

I soldered those wires to the battery box of the LED case to connect them in parallel so the voltage across the LEDs would remain the same.

I then installed the eyes and lights.