How to make an Anglerfish mask

Step 5: Attach "fishing" LED

This one was kind of chintzy, and you can feel free to improve on it if you like.

I got a coat hanger and bent it form a hook on the end. I then slid some coiled spring things I had from a cheap-o broken mini-tripod onto the wire and bent the remaining end into a curved piece.

I sandwiched the curved piece in two pieces of cardboard with hot glue. I cut a small hole in the forhead of the fish. I fed the end of the wire thru the hole.

I then hot glued the cardboard to the interior of the fish.