Instructables
Picture of Another bottle lamp.
2012-04-22_17-07-57_373.jpg
2012-04-22_17-07-51_878.jpg
2012-04-22_19-56-27_579.jpg
2012-04-22_19-56-30_803.jpg
2012-04-22_19-56-15_344.jpg
2012-04-23_21-30-47_333.jpg
2012-04-23_21-29-30_202.jpg
2012-04-23_21-29-43_378.jpg
2012-04-23_21-29-56_302.jpg
ZBSFGFGB.bmp
I just wanted to post up a bottle lamp i made. Read a few bottle lamp instructables here and decided to make my own. Im not going to give step by step because there is a few already on here, this post is to just give an idea of what/ how it can be done. If any questions feel free to ask.
TOOLS THAT WERE USED.
Router
soldering gun
hot glue gun
torch(to burn the edges of the wood)
saw of some sort
home depot sells a bottle lamp kit for around $10.
wood stain
clear spray paint.
touch controller same section at home depot as the bottle lamp kit.
jb weld



USED THESE 2 INSTRUCTABLES FOR REFERENCE.
http://www.instructables.com/id/How-to-turn-your-old-liquor-bottles-into-desk-lamp/

http://www.instructables.com/id/Simple-conversion-of-metal-lamp-to-use-touch-swi/