Instructables
Picture of Another iPod Dock
P1010535.JPG
P1010535.JPG
P1010535.JPG
P1010535.JPG
This instructable will show you how to build a cheap or free iPod dock suitable for any iPod or iPhone.

You will need the following:
PC Heatsink
Flat-Bladed Screwdriver or similar
iPod Cable
 
Remove these adsRemove these ads by Signing Up

Step 1: Step 1

Picture of Step 1
P1010536.JPG
P1010537.JPG
Bend some of the fins apart to create a gap big enough to fit your dock adapter.

Step 2: Step 2

Picture of Step 2
P1010539.JPG
Wedge the dock adapter in the gap and you're done!
queer1 made it!9 months ago

My heatsink had a side handles (one with a handy little groove so i could wind the cord around it and it not be lopsided. ) and a platform,

IMG_0001.jpgIMG_0002.jpg
burble_3994 years ago
Genius, nice and simple, Thanks :)