Another IPod Dock

By sladek in Circuits Audio

1,659

This instructable will show you how to build a cheap or free iPod dock suitable for any iPod or iPhone.

You will need the following:
PC Heatsink
Flat-Bladed Screwdriver or similar
iPod Cable

Step 1: Step 1

Bend some of the fins apart to create a gap big enough to fit your dock adapter.

Step 2: Step 2

Wedge the dock adapter in the gap and you're done!

Recommendations

KINETIC COASTERS With a TWIST! Laser or 3D Printable by DIY Machines in Art

66 4.8K

Raspberry Pi NAS by Frank Bernhardt in Raspberry Pi

1 426 71K

DIY E-Kayak Part 2: Oar Controller by BradenSunwold in Microcontrollers

1 20 6.2K

Lab Bench Power Supply by Giovanni Aggiustatutto in Tools

5 654 60K

For the Home Contest
Green Future Student Design Challenge
Engineering in the Kitchen - Autodesk Design & Make - Student Contest

Introduction: Another IPod Dock

Step 1: Step 1

Step 2: Step 2

Recommendations

For the Home Contest

Green Future Student Design Challenge

Engineering in the Kitchen - Autodesk Design & Make - Student Contest