Print PDF
Favorite
Email
Step 7Put the battery back together
Once the fuse is replaced, you can test it by pressing the test button on the bottom of the battery pack.
Of course, if your battery is totally dead. The LED will not turn on.
In that case you will have to charge it a bit after reassembling it.
Put back the battery in reverse order.
Of course, if your battery is totally dead. The LED will not turn on.
In that case you will have to charge it a bit after reassembling it.
Put back the battery in reverse order.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
