Step 8: Get the IR LED in the hole

We are almost finished. One of the last thing to do is to put the IR LED in that former-cable hole.
It's also a good time to try the Apple NesRemote before closing it.
I have three for sale: <br>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&amp;item=190800018638 <br> <br>I mounted a battery holder on the NES circuit board this time. You still have to open the case to the change the battery, but considering how long these batteries last, it's not a big deal.
Awesome project, planning on doing the same but with this for my linux: http://tinyurl.com/3ksx8l3<br><br>For the desoldering do I have to use the pump thing or can I just heat it up and yank the cable out? Like is it necessary to have it go through the holes?
To remove the cable, you can heat of the solder and yank the cable, yes.<br><br>But, to solder back the remote's wires, it's going to be easier, more solid, and sturdier if you solder back the wires INTO the holes, instead ON the holes. I think that's what your question. Id you don't have a pump, you can get one on ebay for cheap, or get some copper brass... it'll do the trick wonderfully
Many people will like this deal, I want to buy it.This keyboard works well for ipad 2.<br><a href="http://www.mallextreme.com/2-4ghz-2-4g-wireless-rii-mini-pc-keyboard-with-touchpad-black_p26251.html">http://www.mallextreme.com/2-4ghz-2-4g-wireless-rii-mini-pc-keyboard-with-touchpad-black_p26251.html</a>
I will likely be attempting this fantastic mod this weekend, albeit with the new aluminum remote (for an Apple TV 2). Do you have any tips/hints/pointers that have not already been mentioned? Thanks!
Not really. As I said in an earlier post, the only major difference between the 2 remote is the added middle button. Either than that, it's pretty straightforward.<br><br>Thanks for commenting !
The other major differences appear to be the battery and the infrared LED. The LED does not appear to be a traditional LED so I'm not sure how to extend it/position it in the hole. Anyway, I understand this is past the scope of your guide, so I'll jus thave to wing it. Thanks for the excellent 'ible.
Yeah, I see what you are talking about as not a traditional LED. The new remote uses a surface mount LED instead of a thru hole one. I think this is going to be your major bottleneck.<br><br>But I have an idea you could try : You could try to place the remote in a similar way I put mine, but without touching the LED. Near the hole, you could place a small mirror at 45&deg;. That might be a quick and easy solution you might want to consider. At least, I think it's worth a shot.
I like the idea, and I believe aluminum foil also reflects infrared light, so I'll probably try that.<br><br>So far all I've done is disassemble the NES controller (haven't desoldered yet) and re-assemble the Apple remote with the battery outside of the aluminum casing. The aluminum remote is much harder to work with than the first generation white remote, though a little electric tap and hot glue is keeping the battery attached to the remote.<br><br>I plan to desolder the controller wires and chip tomorrow, and then solder 22 AWG wire from the remote to the controller within the next couple of days. I'll be sure to post back with my findings and pictures of the setup with the new remote.
Desoldering went fine, though two of the center pieces on the Apple remote broke off while soldering, so looks like I'll be abandoning the project :/<br>Thanks for all the help!
Sad news ... You could try to buy a second hand one on ebay. I think you can get one for less than 15 $ shipped. Or, you could try to solder back with tiny wires the broken arms. Good luck on whatever you try.
can you do it with the new remote
I don't see why you couldn't. The teardown process with obviously be different but the rest should be similar. The main difference between both remotes beside the casing is the addition of a button in the aluminium remote. But still, it should work with the new remote, yes.<br><br>Here's a teardown blog entry of the remote.<br>http://manirazaghi.com/mechanical-design/disassembling-the-unibody-aluminum-apple-tv-remote/
&nbsp;and the mac???
Does it need a battery door?
Just finished mine! <br/><br/><a rel="nofollow" href="http://www.youtube.com/watch?v=WWDXRjoKQe8">http://www.youtube.com/watch?v=WWDXRjoKQe8</a><br/>
I'm selling mine.<br/><br/><a rel="nofollow" href="http://tinyurl.com/nf3nvf">http://tinyurl.com/nf3nvf</a><br/>
Do you still have this? If you do...How much would you want for it?
Congrats !
For anyone interested, know that these instructions are perfect, and i LOVE my new NESmote!!! A few pointer for those attempting this: DON'T use a "ColdHeat" to solder electronics. They're ridiculously hard to use, and more than once i thought i had totally destroyed my project. (had i messed up, new apple remotes go for $10 on ebay, and i was able to find old NES controllers for $5 locally) Also, I did my solder points on the NES controller on the opposite side than the one shown here. I found it was much easier to fold the wires down than to wrap them over the top. Anyways, thanks again Agurri, you rock socks! Now if only there was a way to incoroporate an iphone into something like an old gameboy.....
i saw the other day a sticker (like a skin) that would atach itself to the back of your white iPhone and simulate a gameboy :P was really funny
I just finished my Ipod Shuffle NES controller, check it out here: <a rel="nofollow" href="http://www.instructables.com/id/NES-Controller-Shuffle-Nintendo-Controller-MP3-v/">http://www.instructables.com/id/NES-Controller-Shuffle-Nintendo-Controller-MP3-v/</a><br/>
Thats so cool! I do have an Apple Remote, but I do not have an NES controller.
this is awesome!
Windows compatible?
As long as you have a mac running bootcamp, I don't see why it should not work. But, I have tried on my macbook and I can play/pause, next track, last track and volume up and down with ease. But iTunes is kinda the only thing the remote works with in Windows.
Great Instructable, I just finished mine, it controls my ipod speakers, it is really cool <a rel="nofollow" href="http://www.youtube.com/watch?v=4YvLFEP1Qd8">http://www.youtube.com/watch?v=4YvLFEP1Qd8</a> check the video, it is in spanish since I am Mexican. But I hope you enjoy it. Again great instrutable<br/>
Wow, it seems cool. Good job on getting it worked :D. Two thumbs up !
*sigh* I wish I knew about soldering and wires so I can make this. I have the controllers but I don't have the knowledge. I thought it was going to be simpler to make. :(<br/>
Just keep trying, people are not born with the ability to do things, like Jimi Hendrix might have been born with a guitar in his hand, but didn't learn to play it till he was seven :P
there are plenty of instructables on how to solder. I taught myself just by playing around (safely) with solder and a soldering iron.
I'm new to this site. I found some good things but It may be a while before I start working on this. Wish me luck!
Well, before doing the project, practice you soldering skills. Also, look on the Internet for some soldering guide. Concerning wires, you can go to Radio Shack and buy some; you don't need exactly gauge 22 wires... they just need to be small enough so fit in the PCB's hole. I'll be glad to help you if you have any problems.
good job! i thought about doing this a few days ago, but this got posted! i guess i'll go to gamecrazy at hollywood video, they have these for about 5 dollars, or an n64 controller.
N64! yay!!! that is the best system!!!!
yeah, although i haven't played my family's n64 in years.......... xbox360
what games? it is my favourite system, even thought i have loads, including wii
games for n64 or xbox360?
Since apple remotes are $20, i'm gonna use my $2.50 dealextreme stealth mini remote!<br/><a rel="nofollow" href="http://www.dealextreme.com/details.dx/sku.2663">http://www.dealextreme.com/details.dx/sku.2663</a><br/>
hey I have an idea, if you are like me, and a VERY novice hacker, you could just put the remote under the control panel and leave the wires untouched!
Good job, I like retro things, as you can see!
Looks cool, I'll try it just for the fun
My remote is also brand new... however I never use mine, hmmmm. Now to find an old NES controller. Good idea, I'll do this one later. Fav'd
I like this! If not for the fact that my remote is brand new, I would have done this
Great instructable! Good pictures, clear explanations and a very decent result. I still have two NES remotes waiting for the propper projects, and this got me thinking........

About This Instructable


114 favorites


Bio: I'm just a regular guy who likes to build stuff, discover things... you know the drill. I'm a bachelor in electrical engineering. I ... More »
More by Agurri: Easy Lego iPod Speaker for less than 2 $ ! Apple NesRemote
Add instructable to: