Introduction: Apple Angel #6

Picture of Apple Angel #6

I was inspired by the butterfly but when I found it was too hard I decided to make an angel.

I will be compiling this series in a collection you can find here.

This is a one step to success style so I will only make 1 small step!

Step 1: The Shape

Picture of The Shape

Firstly you need to cut a slice of apple about 1.5cm thick.

Next you need to cut out the shape of the angel, I suggest leaving the head until last.

You will have to cut vertically on each side of the section that you don't want and then cut horizontally and pop the piece out.

Do this for the wings and then be very careful around the head as it is easily broken.

Once you have made all the cuts you are done!

Thanks for viewing, please vote and help me on my mission to reach 50,000

Comments

seamster (author)2014-09-26

Angelic applery!

JM1999 (author)seamster2014-09-26

Haha...

About This Instructable

141views

1favorite

License:

More by JM1999:Pyromaniac Sparkler Fire FountainShark Tooth EarringsTurn An Old Magazine Into Artwork Easily!
Add instructable to: