Print PDF
Favorite
Email
Step 3Fix the key
The bottom of the buttons aren't even, so you have to flat it with a sandpaper.
Cut out the gap for the USB connector! Use a pencil to mark the size of the connector!
Also, remove those plastic peaks from the key, just to make space for a pendrive inside! I just melt them out with a soldering iron.
Cut out the gap for the USB connector! Use a pencil to mark the size of the connector!
Also, remove those plastic peaks from the key, just to make space for a pendrive inside! I just melt them out with a soldering iron.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
