Aquaglove

Step 2 Construction

It only takes a few minutes to set up an Aquaglove. A well attached glove is the secret to a large Aquaglove.

• The glove needs to be attached to the hose securely. When inflated to four feet long it will be heavy and under pretty high pressure. Use plenty of tape.
• Between 1" and 2" of glove needs to be wrapped around the hose end. Do not wrap too tightly. Place the hose in the middle of the glove opening and carefully wrap the two sides of rubber around it. Wrapping both sides of the glove opening in the same direction maintains the shape of the glove.
• Tape tightly around the twisted glove first, ensure the tape is smooth and then extend the tape down the hose about 2" to create a seal.
• Check the glove is not snagged on any loose tape and place on a large piece of lawn.