Step 6: The Completed Physical Model
These images are of the final, complete physical model. The material used for the model is gray chipboard to which I applied a single coat of refined Linseed Oil.
You'll notice a black metallic looking component not in the original 3D model. Those were cut by hand and are actually painted/textured basswood. Acetate was used fro the windows which were hand cut, and painted basswood was used for the mullions. Those too were cut by hand.
You'll notice a black metallic looking component not in the original 3D model. Those were cut by hand and are actually painted/textured basswood. Acetate was used fro the windows which were hand cut, and painted basswood was used for the mullions. Those too were cut by hand.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
