Introduction: Arduino Basic Blink

This example shows the simplest thing you can do with an Arduino to see physical output: it blinks the on-board LED .

Step 1: Parts Needed .....

Picture of Parts Needed .....

* ARDUINO UNO

* LED RED

* MALE - MALE JUMPERS

* BREAD BOARD

Step 2: Wiring ................

Picture of Wiring ................

Attach The LED To The Breadboard & Connect A Male - Male Jumper From LED + ve Lead To Arduino Pin 13

Step 3:

Picture of

Connect Another Jumper From Arduino GND To LED - Ve Lead



Step 4: SCHEMATICS ......

Picture of SCHEMATICS ......

Step 5: More Info .....

Arduino Main Software :-- https://www.arduino.cc/en/Main/Software

------------------------------------------------------------------------------------------------

Code :--

http://www.mediafire.com/file/3w5du6ddjt2dv0x/Blin...

---------------------------------------------------------------------------------

Where To Buy

-----------------------

Arduino Uno :-- https://goo.gl/gcfzDh

Led :-- https://goo.gl/gcfzDh

Male - Male Jumpers :-- https://goo.gl/gcfzDh

Breadboard :-- https://goo.gl/gcfzDh

Comments

About This Instructable

154views

3favorites

License:

Bio: Teaching is a very noble profession that shapes the character, caliber, and future of an individual. If the people remember me as a good teacher ... More »
More by SreeR18:Arduino Flappy Bird Game   How to Install  Arduino LibrariesHow to Make Custom Characters for Led Matrix
Add instructable to: