Print PDF
Favorite
Email
Step 4Assembly.
You may be done with the software but the hardware is not finished.
Now, take one of your speaker wires, and then plug it into pin 3 which is a PWM pin. Then, plug it into ground or power (5 volts or you bust you Arduino. )
You should hear music playing.
Now, hit the reset button to here it from the beginning.
Everytime you hit the reset button, it will play.
Now, take one of your speaker wires, and then plug it into pin 3 which is a PWM pin. Then, plug it into ground or power (5 volts or you bust you Arduino. )
You should hear music playing.
Now, hit the reset button to here it from the beginning.
Everytime you hit the reset button, it will play.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
