Step 9: The final test
Let's see if it works. Connect up the Arduino-with-shield
assembly to our laptop with the USB connector cable and fire up the Arduino IDE.
Load the Examples -> SD -> Cardinfo sketch. Compile and upload it.
Again, a little prayer wouldn't hurt.
Success!
assembly to our laptop with the USB connector cable and fire up the Arduino IDE.
Load the Examples -> SD -> Cardinfo sketch. Compile and upload it.
Again, a little prayer wouldn't hurt.
Success!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
