loading

Has made the integration of Arduino + ESP8266 + Software Opto22, implementing its environment scada right through IP and Modbus TCP Modbus RTU, the idea is to implement this hardware in the industry for both monitoring and control.

More information on this project :

Blog PDAControl English

Blog PDAControl Español

Channel Youtube

PDAControl

Step 1: Arduino MEGA 2560 Master Modbus Potenciometer Display Oled

Arduino MEGA 2560 Master Modbus Potenciometer Display Oled

The Arduino configured as Modbus RTU master sends the value of the potentiometer to the slave in this case a slave simulator.

More information on this project :

Arduino Mega 2560 Oled Display I2C Master Modbus RTU Scada Industrial Connection

Step 2: ESP8266 Bridge Slave Modbus TCP - Slave Modbus RTU

ESP8266 Bridge Slave Modbus TCP - Slave Modbus RTU

ESP8266 test Registers as a bridge between Modbus RTU and Modbus TCP IP (Ethernet)

More information on this project :

ESP8266 Mode Bridge Modbus RTU Slave - Modbus TCP IP Slave

Step 3: Arduino Mega 2560 + ESP8266 Modbus RTU Modbus TCP IP Industrial Applications

Arduino Mega 2560 + ESP8266 Modbus RTU Modbus TCP IP Industrial Applications

ESP8266 + Arduino Mega ready to connect to SCADA OPC PLC Performing a mixed industrial network Modbus RTU Modbus TCP IP

More information on this project :

Arduino Mega 2560 Oled Display I2C Master Modbus RTU Scada Industrial Connection

ESP8266 Mode Bridge Modbus RTU Slave - Modbus TCP IP Slave

Step 4: Installation PAC Project Basic and Simulator PAC Sim

Installation PAC Project Basic and Simulator PAC Sim

Process software download and installation of software for Opto 22 controllers in this case download the PAC Project Basic, which includes software programming, design HMI and SCADA Runtime.

More information on this project :

Download and Installation of PAC Project Basic + PAC Sim (Simulator Opto22)

Step 5: Download Strategy Modbus TCP IP Master in PAC Project Basic Opto22

Download Strategy Modbus TCP IP Master in PAC Project Basic Opto22

Opto22 example of strategy setting according to requirement as master or slave Modbus TCP, in this case for integration is configured as Modbus TCP master is discharged are configured holding registers for reading and writing respecting addressing.

More information on this project :

Download and Installation of PAC Project Basic + PAC Sim (Simulator Opto22)

Step 6: Integration Final - Arduino ESP8266 SCADA Industrial Integration on Opto 22

Final test

Arduino ESP8266 SCADA Industrial integration on Opto 22

This is the integration of the previous 5 tutorials

Arduino + ESP8266 + PAC Project Basic + PAC SIM

More information on this project :

Arduino + ESP8266 + Software Opto22 example Scada Industrial

Step 8:

More information on this project :

Downloads complete

Blog PDAControl English

Blog PDAControl Español

Channel Youtube

PDAControl

About This Instructable

3,271views

9favorites

Bio: Share & Learn - Makers. Projects, Articles, #automation, #PLC, #Arduino, #IoT and More PDAControl
More by Jhon_Control:ESP8266 Two Serial Ports With SoftwareSerial Library Arduino Slave Modbus RTU & PLC Panasonic RS232 Industrial  Quick View to Platform IoT Emoncms OpenEnergyMonitor in Hosting 
Add instructable to: