With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This project gives the user a fortune and lucky number like from a fortune cookie. This was made as a Christmas present.
Solder header pins onto LCD. Solder wires to female header pins and hookup to Arduino. Here we used the LCD 4 bit Library and hooked it up according...
Check that the code and screen work.
Using an old cigar box I created a shell for this project. I had to cut 4 holes for the LEDS, 1 hole for the LCD, 1 hole for the on/off switch and 1 ...
Now for the tricky part, stuff all the wires into the box!Here we hookup the battery by itself to the on/off switch, stuff everything inside and hooku...
Work is complete - get a fortune!
#include #define countof(array) ( sizeof(array) / sizeof(*(array)) )LCD4Bit lcd = LCD4Bit(2);// Todd Miller 2008int ledPin = 13; // choose the pin for...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »