Introduction: Arduino Ir Leds (very Easy)
pls see the video and subscribe my youtube channel.
these can be programmed for various modes also
this is ,y first instructable.
more coming soon
Step 1: Gathering Materials
4.)resistors (220 ohm)
Step 2: Connections
just connect the things to specified pins in the code and connect the ground and vcc.
tsop 1738 to 3.3v
Step 3: Set Up
open the library of ir remote in arduino and accept the values of your remotes respective button adn convert ot hex decimal and then replace the values in the code with those values.
Step 4: Play
play and have fun with it.
try customizing it.