Arduino – LED Cube 3x3x3

In this tutorial I’ll show how you can create your own LED Cube 3x3x3. I’m sure you already saw some similar projects to this one but you never took action and made your own. Now it’s time to make your own!

By the way you can find more project here: http://randomnerdtutorials.com/

Watch this Demo Video of my project:

Step 1: All Parts Required

• 1x Arduino Board
• 27x LED’s
• 1x Stripboard
• 3x 22k ohm Resistors
• 9x 220 ohm Resistors
• 3x NPN Transistors (for example: 2N2222, BC547, 2N3904)
• Wires

(I included a picture with all the parts)

Step 2: Video Tutorial + Schematics

If you follow my video tutorial I think you'll understand how you can finish each step! If you have any problem please leave a comment below. (I also included my schematics in the pictures)

Step 3: Upload Source Code

Download the library here.

Be sure to download the library and unzip it to libraries. If everything is correct you should find an example in the Arduino IDE software under File > Examples > LedCube > ledcube.

Upload that ledcube example!

Step 4: Final Product

That's the final product!

Did you enjoyed this project? 

Make sure you share this project and leave a comment below... It helps me a lot!

P.S. If you enjoyed this tutorial perhaps you might like my next ones. (Make sure you visit my website for more projects just like this one)