Introduction: Arduino Led 4x4 Mini Game

This is a project creating a game which is similar to the classic game "snake". There is a red led that flashes at the begining, thereafter there is a green led that turns on and you are able to control using the four buttons.

The objective of the game is to capture the randomized led with your green led. For every target that is captured the interval that you are allowed between rounds lessens with 0,3 seconds.

Step 1:

Step 2: Description of the Game

This is a project creating a game which is similar to the classic game "snake". There is a red led that flashes at the begining, thereafter there is a green led that turns on and you are able to control using the four buttons.

The objective of the game is to capture the randomized led with your green led. For every target that is captured the interval that you are allowed between rounds lessens with 0,3 seconds.

Step 3: Component List

1x Arduino

16x RGB LEDS three pin

1x shiftregister 74hc595

4x Push buttons

4x 220 ohm resistor

A bunch of cables

Step 4: Code

The code for the project can be found to download at https://github.com/Nicklas-Zacharias/Led-matrix-game/tree/master

Step 5: Schematic

The shematic for the project

Comments

author
craftclarity (author)2014-06-04

Looks like it was fun to build, any plans for an enclosure?

About This Instructable

1,291views

8favorites

License:

More by polhemscorp:Arduino Led 4x4 Mini Game
Add instructable to: