Arduino Lock


Introduction: Arduino Lock

Arduino door or anything lock .
arduino board
servo motor
9v battery
led light

Step 1: Connect the Keypad With Arduino

connect the keypad as the photo ....step 1

Step 2: Connect Servo to the Arduino

connect the servo to the arduino as the photo..

Step 3: Connect the Led Light

connect the led light if you want it when pass is true yellow light turn on
when is wrong red turn on .....
connect lights in breadboard the take tow jumpers from the yellow and the red as the photo
then connect the red like this
- side to gnd
+ side to 13
green light
- side to gnd
+side to 12

Step 4: Code

you can download the code from here..... ......if you have 4*4 keypad change as the photo.........if you dont know from where to press download see the5 photo ?
you need
password and servo library download from here:
servo :

password :

and enjoy it ..thank you
if you like the project please like and follow........i have many projects . but i have exams when i finish it i'll back to you ??



    • Water Contest

      Water Contest
    • Clocks Contest

      Clocks Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    8 Discussions

    jajajaja the page web is

    you web page its down.

    great , thanks for sharing

    the websites dont work no more

    Hello, i didnt use the Arduino before but i just want to ask something.

    Do i need a specific type of jumper like male to male or female to female?

    hello, your original pictures show a 4x4 Keypad, I have the same and it has 8 pins. Do you happen to know how to connect an 8 pin 4x4 keypad?