Introduction: Arduino Master Modbus RTU Scada Industrial Connection

Picture of Arduino  Master Modbus RTU Scada Industrial Connection

This evidence although simulate other tests carried out in previous Post implemented Arduino and protocol Modbus RTU serial master mode, is the first step for connecting arduino an environment Scada Industrial we will see more before implementing Modbus TCP IP, if you want to see continue in PDAControl final application.

More information on this project :

Blog PDAControl English

Blog PDAControl Español

Step 1: Other Implementations Arduino and Modbus RTU:

Picture of Other Implementations Arduino and Modbus RTU:

Other Implementations Arduino and Modbus RTU:

Modbus RTU Master Library tests with Arduino

Modbus RTU Master tests with Arduino via RS232 and screen Panasonic GT01

Modbus RTU Master tests with Arduino via RS232 and PLC Panasonic FPX C14R

Explanation of Application

In this test we will read a potentiometer 100k connected to the input analog 0, the value of ADC0 0-1023 be transmitted via Modbus RTU Simulator Master Modbus in Holding Register [11] and this transmitted value is displayed on the display oled Connected to the Arduino via I2C.

Step 2: Video - Arduino MEGA 2560 Master Modbus Potenciometer Display Oled I2C

Step 3: Mounting - Components and Materials Required for Testing

Picture of Mounting - Components and Materials Required for Testing

Step 4: More Information on This Project :

Picture of More Information on This Project :

More information on this project :

Downloads

Blog PDAControl English

Blog PDAControl Español

Comments

About This Instructable

2,257views

10favorites

Bio: Share - Learn - Makers. Projects, Articles, #automation, #PLC, #Arduino, #IoT and More PDAControl
More by Jhon_Control:ESP-IDF for Modules ESP32 Complete InstallationControlling Arduino From Node-RED With Firmware Firmata IoT#View Dashboards Emoncms & ESP8266 + Arduino #IoT
Add instructable to: