Introduction: Arduino Mousetrap

Hi there.

Today we are going to make smart Mousetrap with Arduino:)

You reach everything in this instructable.

Let's start friends!

You can watch the video..:)

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

Step 1: What Will We Need?

Picture of What Will We Need?
  1. Arduino
  2. 2xServo
  3. Cardboards
  4. Infrared Obstacle Avoidance Sensor
  5. a Mini breadboard
  6. Buzzer

Step 2: What Do We Want?

Picture of What Do We Want?

We want to;

  1. If a mouse enter the box, cap will close
  2. When mouse is inside the box, buzzer will get active
  3. When cap closed, a lock will lock the door..:)

Step 3: Cardboards;

Picture of Cardboards;

7 x 9 x 12 cm cardboard box

You can make own your box or you can get.

Then make holes for sensor and servos'.

Make a cap and hold this to servo1.

Step 4: Connections;

Picture of Connections;

IOA to Arduino;

Signal to A0

Vcc to 5V

Gnd to Gnd

Buzzer to Arduino;

Long pin to D2

Short pin to Gnd

Servos to Arduino;

Servo1 signal to D9

Servo2 signal to D10

Step 5: Codes;

Picture of Codes;

You can get this work from this link;

https://drive.google.com/open?id=0B6EUM2JQFzOhNG5x...

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

Follow my Youtube Channel and get all projects video; >>>My Youtube Channel<<<

Comments

Fathomlis (author)2017-04-26

Smartly done! Did you do the coding?

ensarlevent (author)ensarlevent2017-04-27

Thanks for your comment friend.:))

AlexanderP124 (author)2017-04-27

Nice idea indeed. Just needs a bit more work on the door construction as if the
side gaps are bigger than 0.5-1 cm, the mouse will easily squeeze
through and escape.

Yes, dear friend. I hardly did it..:)

Of course it's improvable. Thanks for your comment..:)

About This Instructable

970views

4favorites

License:

Bio: BIG THINKS, BIG THINGS! FOLLOW US ON YOUTUBE: https://www.youtube.com/channel/UCODcdPwhBerlNMSHB_ATEow
More by ensarlevent:SMART MINI GREENHOUSEBayern München Spinning WhellTURN ON LIGHTS WITH RFID CARD
Add instructable to: