Introduction: Arduino - Multi Servo Control Up to 16 With Arduino

In this tutorial we will learn how to control multiple servo with the Arduino.

For this we will use "16 Channel Servo Expansion Board For the Arduino Uno R3". You can also control 2 DC motors and 1 stepper motor with this motor shield.

Step 1: Required Hardware

Required Hardware:

Arduino Uno R3 - https://goo.gl/Rqc5w2

16 Channel Servo Shield - https://goo.gl/6tP0t2

SG90 Mini Servo - https://goo.gl/6tP0t2

Power Adapter - https://goo.gl/6tP0t2

Some Promotion Links

Flash Deals -- https://goo.gl/CVqg7P

Mega Stock Clearance -- https://goo.gl/eCbuiP

Arduino Kits -- https://goo.gl/uwr19e

More Budget 3D Printers -- https://goo.gl/uwr19e

Anet A8 3D Printer Promotion -- https://goo.gl/uwr19e

Step 2: Source Code and Library

Adafruit 16 Channel Servo Shield Library

https://goo.gl/Lb7AMc

How to Install Library (Tutorial)

Get More Info About Adafruit Library

https://goo.gl/VKoQL5

Get Tutorial Sample Code

https://goo.gl/vBzyFl

Step 3: You Can Subscribe to My YouTube Channel

You can subscribe to the my YouTube channel for more tutorials and projects. Subscribe for support. Thank you.

Go to my YouTube Channel - https://goo.gl/f0RHmR

Comments

About This Instructable

299views

9favorites

License:

Bio: For more projects and tutorial visit my YouTube channel Mert Arduino and Tech
More by MertArduino:Arduino - MPU6050 GY521 - 6 Axis Accelerometer + Gyro (3D Simulation With Processing)NodeMCU ESP8266 - WiFi Robot Car Controlled by Application (Wifi Bot / Android / IoT)Arduino - Programmable Robotic Arm (Record and Repeat of the Servo Positions)
Add instructable to: