Arduino - NRF24L01 Wireless Transceiver Module

7,674

71

2

Published

Introduction: Arduino - NRF24L01 Wireless Transceiver Module

About: For more project and tutorial visit my YouTube channel Mert Arduino and Raspberry Pi

In this tutorial we will learn how to use the nRF24L01 Wireless Transceiver Module.

We will control the servo motor with using the potentiometer via nRF24L01 Wireless Transceiver Module.

Step 1: Required Hardware

Arduino Board - https://goo.gl/Rqc5w2

nRF24L01 - https://goo.gl/M6fIIx

nRF24L01 Adapter - https://goo.gl/UWQtWy

Potentiometer - https://goo.gl/UWQtWy

Servo Motor - https://goo.gl/UWQtWy

F to F Jumper - https://goo.gl/UWQtWy

M to M Jumper - https://goo.gl/UWQtWy

9V Battery Plug - https://goo.gl/UWQtWy

9V Battery - https://goo.gl/UWQtWy

Breadboard - https://goo.gl/UWQtWy

Some Promotion Links

Flash Deals -- https://goo.gl/CVqg7P

Mega Stock Clearance -- https://goo.gl/eCbuiP

Arduino Kits -- https://goo.gl/uwr19e

More Budget 3D Printers -- https://goo.gl/uwr19e

Anet A8 3D Printer Promotion -- https://goo.gl/uwr19e

Step 2: NRF24L01

nRF24L01 2.4GHz Radio/Wireless Transceivers

There are many options how to connect your Arduino wireless. One of options available is nRF24L+

Step 3: Connections

The module communicates with the controller via SPI interface.

You must use this module with capacitor or power adapterfor correct 3.3V

Step 4: RF24 Library

You must download and install the RF24 library for using nRF24L+ module. You can download from GitHub

RF24 Library - https://goo.gl/z8uy2d

Step 5: Source Code

I created two code, one of for the transmitter and other one for the receiver. You can only copy and paste the code into empty page of the Arduino IDE.

Get the Code - https://goo.gl/u6vFvX

Step 6: You Can Subscribe to My YouTube Channel

You can subscribe to the my YouTube channel for more tutorials and projects. Subscribe for support. Thank you.

Go to my YouTube Channel - https://goo.gl/f0RHmR

Share

    Recommendations

    • Casting Contest

      Casting Contest
    • Clocks Contest

      Clocks Contest
    • Woodworking Contest

      Woodworking Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    2 Questions

    hello sir how can i control a dc motor instead of a servo.thank you

    Hi,

    I'm sorry you do not really speak English! I copy the receiver code to Arduino IDE 1.0.6 and 1.8.3.

    I copied the RF24 master library to the right place.

    I press the check button and the software writes the error messages on the screen.

    There is a problem with this line item:

    done = radio.read(msg, 1);

    This report would have more information with
    "Show verbose output during compilation"
    enabled in File > Preferences.
    Arduino: 1.0.6 (Windows NT (unknown)), Board: "Arduino Uno"
    Receiver.ino: In function 'void loop()':
    Receiver:32: error: void value not ignored as it ought to be

    Sincerely

    Zoltan Nagy

    NRF24L01 Wireless Transceiver Module.png

    2 Comments

    What is the meaning of the picture with an exclamation mark? Is that mean that we have to do or we dont do that?