Introduction: Arduino RFID and 5110 Screen/ID Card Reader(Rc522)

Hi there, today we are going to use Rfid(RC522 with 5110 screen. But this sensor is different than others. Because we will use EEPROM.

We want to;

1 - When we show our ID card we see the ''Welcome Ensar Levent'' on the 5110 screen.

2 - When we show our card second time, it doesn't read.

Let's start..

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

Step 1: What Is the EEPROM?

EEPROM is the memory of Arduino. So Firstly we will show our card and save them to EEPROM. Then we will upload the other code.

Step 2: Connections;

RC522 to Arduino;

3.3v to 3.3v

RST to D9

GND TO GND

IRQ TO (NONE)

MISO TO D12

MOSI TO D11

SCK TO D13

SDA TO D10

5110 TO ARDUINO;

GND TO GND

LIGHT TO (OPTIONAL)

VCC TO 3.3V

CLK TO D2

DIN TO D3

DC TO D4

CE TO D6

RST TO D5

Step 3: Codes;

How can we use the these codes?

Firstly you must upload the Setup code and Show two ID Card. If you show same card 2 times device won't work.

Link:

https://drive.google.com/open?id=0B6EUM2JQFzOhajNq...

Comments

author
Z%C3%BCbeyirE made it!(author)2017-04-02

Dostum projen gayet güzel, bunu wifi veya 3g ile internete bağlayıp, okutulan kartları uzaktan takip etme olsa daha guzel olurdu böylece personel takibi gibi isler icin ticari olarak da kullanılabilir. Diğer projelerinde başarılar..

author
ensarlevent made it!(author)2017-04-02

Teşekkürler. Henüz Sim Shield im yok ama en yakın zamanda bunu nrf24l01 ile birleştiricem. Yorumun için teşekkürler. :)

About This Instructable

4,722views

128favorites

License:

Bio: BIG THINKS, BIG THINGS! FOLLOW US ON YOUTUBE: https://www.youtube.com/channel/UCODcdPwhBerlNMSHB_ATEow
More by ensarlevent:Bayern München Spinning WhellTURN ON LIGHTS WITH RFID CARDDIY Laser Security System
Add instructable to: