Introduction: Arduino - Remote Controlled Tank With WiFi Camera (nRF24L+ / RC / Wireless)

In this tutorial we will learn to build a remote controlled car / tank. We will also add a WiFi camera to make the Tank more equipped. We will use the nRF24L+ module for remote control. With this tutorial, you can learn motor control with the joystick, remote motor control and motor control with the nRF24L01.

If you want, you can make this project with WiFi controlled using NodeMCU.

Step 1: Required Hardware

Picture of Required Hardware

Required Hardware:

Arduino Uno R3 - https://goo.gl/Rqc5w2

Arduino Nano - https://goo.gl/9ZDDyw

nRF24L01 - https://goo.gl/9ZDDyw

nRF24L Adapter - https://goo.gl/9ZDDyw

L298N Motor - https://goo.gl/9ZDDyw

Joystick - https://goo.gl/9ZDDyw

Tank Chassis - https://goo.gl/9ZDDyw

Breadboard - https://goo.gl/9ZDDyw

Acrylic Sheet - https://goo.gl/9ZDDyw

Jumper/Wires - https://goo.gl/9ZDDyw

Battery Plug - https://goo.gl/9ZDDyw

Battery 9V - https://goo.gl/9ZDDyw

Optional (If you want to add Camera)

Mini WiFi CCTV IP Camera - https://goo.gl/qPJXgQ

Mini Sg90 Servo - https://goo.gl/qPJXgQ

Potentiometer - https://goo.gl/qPJXgQ

Also Recommended other Hardwares:

Lipo Battery - https://goo.gl/2JZnmg

nRF24L Antenna - https://goo.gl/2JZnmg

FPV Camera - https://goo.gl/2JZnmg

FPV Goggles - https://goo.gl/2JZnmg

Some Promotion Links

Flash Deals -- https://goo.gl/CVqg7P

Mega Stock Clearance -- https://goo.gl/eCbuiP

Arduino Kits -- https://goo.gl/uwr19e

More Budget 3D Printers -- https://goo.gl/uwr19e

Anet A8 3D Printer Promotion -- https://goo.gl/uwr19e

Step 2: Source Code

Picture of Source Code

Tutorials about using the nRF24L+ library

https://www.instructables.com/id/Arduino-NRF24L01-...

Project about using the nRF24L+

Get the nRF24L+ Library

https://goo.gl/z8uy2d

Get the Source Code

https://goo.gl/bL27J5

Step 3: You Can Subscribe to My YouTube Channel

Picture of You Can Subscribe to My YouTube Channel

You can subscribe to the my YouTube channel for more tutorials and projects. Subscribe for support. Thank you.

Go to my YouTube Channel - https://goo.gl/f0RHmR

Comments

About This Instructable

1,314views

14favorites

License:

Bio: For more project and tutorial visit my YouTube channel Mert Arduino and Raspberry Pi
More by MertArduino:XY Plotter Drawing Robot | Arduino | PolargraphArduino - Balance - Balancing Robot | How to Make?Arduino - MPU6050 GY521 - 6 Axis Accelerometer + Gyro (3D Simulation With Processing)
Add instructable to: