Introduction: Arduino- TM35 Controlling a DC 12v FAN With Temperature Sensor

Picture of Arduino- TM35 Controlling a DC 12v FAN With Temperature Sensor

Hello world! Today i made a simple project with a LM35 Temperature Sensor and a LCD1602 Screen to control a 12v DC Fan with a arduino and a Relay. Check out the next step for the Schematic, Code & Parts list.

Step 1: Schematic, Code & Parts List.

Picture of Schematic, Code & Parts List.

Simply wire it up like the schematic make sure you have the library LiquidCrystal.h installed, And upload the code.

Parts list:

  1. Arduino uno, i used the RobotDyn uno. (Has 8 analog pins)
  2. LCD 1602.
  3. LM35 Temperature sensor.
  4. KY-019 Relay module
  5. Potentiometer
  6. 12V DC FAN (From a old computer will do.)
  7. Jumper wire set MM/FF/MF

Good luck!

Follow me for more!


vandenbrande (author)2016-08-26

Follow me for more!

About This Instructable




Bio: Hello world! I make simple & Advanced projects for people who want to learn programming and electronics. Most of my Instructables are about arduino and the ... More »
More by vandenbrande:ARDUINO - SOLID STATE RELAY FAN/ventilator Control Using the W1209 Thermistor and SSR-25 DA Arduino - SSR-25 DA Solid State Relay and DS3231 RTC Automatic Timer Lamp Arduino & C# - RGB LED / LED STRIP CONTROL C# Application
Add instructable to: