Arduino - Tilt Switch, Switching on a RELAY With the KY-020

Published

Introduction: Arduino - Tilt Switch, Switching on a RELAY With the KY-020

About: Hello world! I make simple & Advanced projects for people who want to learn programming and electronics. Most of my Instructables are about arduino and the wide range of sensors you can use with it. I ma...

Hello world! I made another example. Today for the KY-020.

We are simply going to switch on a relay to turn the lamp on and off.

Follow the next step for the schematic code & Parts list.

Step 1: Schematic Code & Parts List.

Parts List.

  1. Arduino Uno, I used the RobotDyn Uno.
  2. KY-020 Tilt Switch.
  3. KY-019 1 Channel relay.
  4. Jumper wires MM/FF/MF
  5. Lamp Socket + lamp & power Cable. (Optional)

Good luck!

Share

    Recommendations

    • Planter Challenge

      Planter Challenge
    • Oil Contest

      Oil Contest
    • Clocks Contest

      Clocks Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    Comments