Introduction: Arduino - WEBCAM PAN TILT CONTROL Using Servos & KY 023 Joystick

Picture of Arduino - WEBCAM PAN TILT CONTROL Using Servos & KY 023 Joystick

Hello world! Today i made a Pan tilt control with a old webcam, Dont mind the bad video, i said "OLD" LoL! Its pretty easy to build you need 2 servos a joystick, the schematic, code, and a little creativity. Follow the link for the Schematic Code & Parts List. I simply taped the Servos on top of each other, because i always take my projects apart after my instructables and videos are done.

Step 1: Schematic Code & Parts List.

Picture of Schematic Code & Parts List.

Just wire it up like the schematic & it should work after uploading the code.

Make sure you have the servo.h library installed.

Parts List.

  1. Arduino Uno, I used the robotdyn UNO.
  2. KY-023 JoyStick Module.
  3. 2 X Servo motor.
  4. Jumper wires set. MM/FF/MF
  5. Old Webcam or any other camera that you wanna use. Small is better.
  6. Some creativity to mount the servos.

Good luck!

Comments

About This Instructable

682views

13favorites

License:

Bio: Hello world! I make simple & Advanced projects for people who want to learn programming and electronics. Most of my Instructables are about arduino and the ... More »
More by vandenbrande:ARDUINO - SOLID STATE RELAY FAN/ventilator Control Using the W1209 Thermistor and SSR-25 DA Arduino - SSR-25 DA Solid State Relay and DS3231 RTC Automatic Timer Lamp Arduino & C# - RGB LED / LED STRIP CONTROL C# Application
Add instructable to: