Print PDF
Favorite
Email
Step 6Cutting the watch band
The step covers the cutting of the watch band to create mounting points for the trackball, display, and battery.
The screw holes are 1/8" diameter and the hole for the trackball is 1/2" diameter.
The large square in the picture was for the smaller display I was originally going to use and is not necessary. The smaller rectangle cut out is for the connection to the display which is necessary.
The screw holes are 1/8" diameter and the hole for the trackball is 1/2" diameter.
The large square in the picture was for the smaller display I was originally going to use and is not necessary. The smaller rectangle cut out is for the connection to the display which is necessary.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
