With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Good news, everyone! I just started with the arduino and right at the very beginning I felt that I needed some sort of base to put the arduino on. I ...
Parts are simple. This is what I used: - piece of acrylic (2mm); - motherboard computer standoff (6/32 thread); - rubber bumpers. For tools this is ...
Before we start cutting we have to know what size we are cutting, so the first thing is to measure the board. In my case I need to cut my piece of acr...
Now it's time to start drilling and assembling things. Now that you have your piece of acrylic cut to size put the arduino board back, let's mark the...
Installing the board is a matter of screwing the screws. That's it!!!
Well, this was fun and it's super easy to do. After I finish the first one I went online and did some research. It turns out that some people are giv...
Come on !!!!!! Would you guys really think, after I researched and found the holder with the breadboard attached, that I would stop with my little th...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »