Print PDF
Favorite
Email
Step 31Complete
Congratulations! The UPCB has been assembled.
If your PIC was already programmed, then you just need to install it in your stick and you're ready to play. If your PIC is blank, use the ICSP connector and your programmer of choice to flash the PIC.
Please check for additional Instructables on other UPCB topics, such as creating a Piggyback controller and installation into an arcade stick. All will be tagged with 'UPCB'
Toodles, May 29, 2007
If your PIC was already programmed, then you just need to install it in your stick and you're ready to play. If your PIC is blank, use the ICSP connector and your programmer of choice to flash the PIC.
Please check for additional Instructables on other UPCB topics, such as creating a Piggyback controller and installation into an arcade stick. All will be tagged with 'UPCB'
Toodles, May 29, 2007
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
