Print PDF
Favorite
Email
Step 2Solder on the resistors and capacitors
Place comonents flush up against the board from above. After soldering the legs onto the pads, trim of the excess.
Start by soldering all the resistors. Follow with all the capacitors and the jumper lead. Ensure that the electrolytic capacitor is oriented as described on the circuit layout diagram, the negative side away from the socket.
Start by soldering all the resistors. Follow with all the capacitors and the jumper lead. Ensure that the electrolytic capacitor is oriented as described on the circuit layout diagram, the negative side away from the socket.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
