With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Step by step assembly of the RS232 to TTL Serial Adapter kit from moderndevice.com.This is a great option for connecting the Arduino or Arduino clone ...
Place the resistors in the R1 (10K, Brown Black Orange), R2 (22K, Red Red Orange), R3(180 Brown Grey Brown), R4(10K Brown Black Orange), R5 (10K Brown...
Place the diode in the D1 spot. There is a black line on the board to show the orientation of the diode. Place the black bar on the diode towards to l...
The capacitors are placed in the C1 and C2 spots. Orientation does not matter.
Slide the board between the lugs of the DB9 connector. Note there are 4 pads on one side of the board and 5 on the other. These match the lugs on the ...
Add in the chip. You will need to squeeze the legs in a bit to get it to fit. Pay attention to the orientation. The notch on the chip should match the...
At this point you may add whatever header style you wish, male or female, in whatever configuration you wish, up or down, straight or 90 degree bend.T...
If you wish to use a device with different pinouts than the BBB or the RBBB you may cut the traces between the first and second line of header holes. ...
Shown here is the adapter connected to a RBBB. Good luck and happy coding!
Remove these ads by
Signing Up19,606 views
17 favorites
Posted:
Jan 29, 2009
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
RBBB adapter
GND Reset
CTS GND
VCC 5V
TXD RxD
RXD TxD
RTS