Print PDF
Favorite
Email
Step 16Update!
Here are examples of different board configurations. At the bottom is a board assembled in the original form. In the middle is a kit I will be using with a 9v battery snap (or a battery pack). At the top is a board in the smallest form. This one will require a regulated 5v power supply.
Note I have placed vertical male programming headers to further reduce the board length. The middle board has no I/O headers as I will be soldering leads directly to the board. The top board has female headers. This allows wires or male headers to be plugged in easily.
Note I have placed vertical male programming headers to further reduce the board length. The middle board has no I/O headers as I will be soldering leads directly to the board. The top board has female headers. This allows wires or male headers to be plugged in easily.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
