Print PDF
Favorite
Email
Step 7The IC socket
In mounting the IC socket you may wish to space it off the board a bit. This makes the pin labels a bit easier to read. I used leads trimmed from previous components to lift the socket off the board slightly while I soldered. After, they slide out easily.
One end of the socket has a notch. Notice the image of the socket on the board also has a notch. Match the orientation and solder into place.
One end of the socket has a notch. Notice the image of the socket on the board also has a notch. Match the orientation and solder into place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
