Print PDF
Favorite
Email
Step 7Step 7: Prepare the stabilizing bolt
This bolt will serve to stabilize the camera mount and serve as alignment control, though in a very limited fashion.
Same as before, just screw a nut on to the bolt before putting through the mending plate. You won't need a washer between this nut and the bolt head because the mending plate will fall much lower on this screw.
Same as before, just screw a nut on to the bolt before putting through the mending plate. You won't need a washer between this nut and the bolt head because the mending plate will fall much lower on this screw.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
