loading

Step 2: Finding an image

Find an image that you would like to use.

Remember that you are going to be tracing this image down the line, so if it is your first time doing this, you may want to chose an image with less detail.

Open it in Photoshop/MS Paint and convert the file to a black and white image.
When you've drained the photo of any colour, print it out and let's get started.

Advertisement

<p>Cool Idea! Thsi sis a great way to get started on screen printing.</p><p>I am now using a different method, by printing a reverse image on printer paper, ironing it onto a tee, then using &quot;Stained by Sharpie &quot; fabric paint markers to go over the outline of the line art, then I either paint (fill in areas) with craft paint mixed with textile medium in colors or use the same paint markers to color in. Regular Sharpies for paper fade in the wash. The &quot;Painted&quot; ones do better. I iron the shiny side of freezer paper on the inside of the tee to stabilize the fabric before drawing or painting. keep the fabric from moving.</p>
Um. Where did/does the dried up glue go?
<p>He is making a sort of &quot;stencil&quot; with the embroidery hoop, the pantyhose and the glue. They make a one piece unit that he lays over the shirt before painting. The glue stays on the stencil after the shirt is painted through the open areas of the hoop and fabric where there is no glue. He lifts the whole hoop, nylon and glue combination off the shirt after painting.</p>
Cool! I would imagine that using a VERY soft, slightly blunt pencil for your tracing would be helpful in preventing rips in the nylons. Would a marker run with the paint, d'you think?
<p>They make markers for sewing that fade in 24 hours. One could trace right before painting in the glue. Some of the markers of the same type only come out once they get wet, but all must be tested to see if they will leave a stain.</p>
Would tulle be a good substitute for nylons?
<p>I think the holes in tulle are still too big to get crisp lines. The bigger the holes in the &quot;netting&quot; or sheer fabric, the less clean an edge one can make. But you might just do a quick test project on a scrap piece of tulle and a piece of old white fabric. I was think more like chiffon. It's polyester and more fine than tulle. It's very thin, but closely woven. You could use an old very thin scarf if you have such. Pantyhose (often called &quot;nylons&quot; after the old style nylon hose people used to wear back in the 50's) are delicate and so easy to damage. Silk screening was done with thin silk, and is now done with a thin nylon fabric.</p><p>I Googled and found that a fabric mesh of 110 to 160 (threads per inch) works best for fabric, and one needs a higher count for paper to make crisp thin lines. so cheap pantyhose, an old very thin scarf, very thin drapery fabric. Just look around for any very thin fabric that is closely woven with a relatively tight weave.</p>
excellent! great job have to try this. thank you for sharing!
Love this screen printing technique - I do it the same way myself ;-)
Thank you I really hope I can do it. Kat
I am sure Ingela found the <a rel="nofollow" href="http://www.instructables.com/id/D.I.Y.-Screen-Printing/">other Instructable on this topic.</a> I think it would at least be the polite thing to do to acknowledge the fact that you did your research first and still thought you should post another Instructable because you have something to add. <br/><br/>I did this based on the earlier version. For an image I took a picture and created a black and white image. Getting that right was the hardest part of the project, and it still came out wrong. Have patience and step back from the final image to make sure there are no problems. I tinted my Mod Podge with food coloring so I could see it. My table top was white and white Mod Podge was just too hard to see. I used inexpensive acrylic house paint (custom color from Home Depot) instead of the expensive Speedball paints. Acrylic house paint Never comes off a shirt. For a sheer material I got some cheap, not stretchy, lace at Wal-Mart. It was reasonably sturdy to transfer the design. To spread the paint quickly and evenly across the stencil I dumped a load of paint and spread it with an old credit card. As I recall all these hints came from Threadbanger's Instructable and the comments. <br/><br/>You can reuse the stencil if you clean the paint out quickly. You can make several prints at one time, but the paint (or ink) will start to dry and fill the holes, so keep the process moving and be ready with a hose to blow the paint out as soon as you are finished. If the paint dries, it is permanent. For that matter, you could probably use acrylic paint instead of Mod Podge to create the original stencil. <br/>
Nice idea - can you re-use the screen at all, or is this strictly a one-off process?
What a cool technique! And much easier than typical silkscreening...
Wowzerz, that's awesome! It came out great too, and that's pretty funny. (The shirt, of course). Great job, hopefully I can do this!

About This Instructable

87,325views

122favorites

License:

More by Ingela:At home silk screening on the cheap! 
Add instructable to: