Instructables

Giant Atari Joystick Lamp

FeaturedContest Winner
Picture of Giant Atari Joystick Lamp
stick 041.jpg
socket 002.jpg
atari lamp 005.jpg
stick 044.jpg
stick 045.jpg
stick 046.jpg
This lamp is a fairly accurate scale model of the classic Atari joystick. It is made out of medium density fiberboard (MDF) and stands almost two feet tall. The red button turns the lamp on and off, and the lampshade is a collage of printouts of classic Atari game covers.

This project was a fun challenge for me, and posed a lot of little dilemmas along the way. In the end I was quite happy with the way it turned out! 

Thanks for looking. Enjoy!
 
Remove these adsRemove these ads by Signing Up

Step 1: Top piece

top7.jpg
I didn't have a real joystick to study and measure for dimensions, so I went off of pictures I got online. I think I got the proportions pretty close though, just through some basic math like height/width ratios, etc.

I purchased one 2 by 4-foot panel of MDF in each of the following thicknesses: 1/4", 1/2", 3/4". I also purchased one 2 by 4-foot sheet of 1/8' hardboard. I had plenty of material left over afterward.

MDF is great for things like this. It's easy to cut, shape, and sand, and it doesn't warp, crack, or split like wood (unless it is left out in the elements, or you drill a screw straight into it). Be sure to cut, route, and sand it in a well ventilated area.

If you plan to make one of these, I would recommend finding a real joystick to work from. Measure it and make all your pieces proportional to it.

The top piece is cut from 1/2" material. See photos for details on cutting the beveled edge.
1-40 of 70Next »
nathanielg1 year ago
i have an atari i been playing for the past couple weeks, i found it in my grandparents attic and about 4 of every type of controller so i think i am going to take on this project in honor of the best game system ever built!
i want to do this when i get some time
this is clever
Some Dork3 years ago
LOVE this! I think I now have a winter project. :D
yokozuna5 years ago
Very well done, are you a member at AtariAge? It's a great website. Also, is the orange button the on/off switch?
seamster (author)  yokozuna5 years ago
The orange button is the on/off switch. I'm not a member at AtariAge. I found the website while working on this project and really enjoyed all the nostalgic memories is brought up. I'm really thinking I need to track down our old 2600, (if it's still in the family somewhere), or buy one. The old games were so much fun.
Awesome lamp!! You got my vote. For Christmas this year I got my wife Activision Anthology for our PS2. It has all the the Activision games ever made for the 2600 (plus a couple that they never released). What a blast from the past. If you can't find an old 2600 you could look into that instead. Again, great job and very well made instuctable. I hope you win.
atari remake here:
http://www.dealextreme.com/details.dx/sku.27790

made in china of course!
God damn it! That was the name of the game I've been looking for, for absoultly ages! (Remember seeing it at a charity shop at one point for £5, regretting that I didnt buy it...)
RcStumpman4 years ago
Awesome job! Brings back lots of memories! :-)
getbusy214 years ago
You'd have to be 50 or 60 feet tall to play with that thing. Imagine he size of the cartridges. Awesome!
kcls4 years ago
It would be super cool if you could turn the light in by pushing the action button on the joystick!
seamster (author)  kcls4 years ago
Check out the intro, third sentence. 
kcls seamster4 years ago
Oh yeah, look at that! Just goes to show ya my lack of attention.
sickdog744 years ago
Awesome! This rocks! I love it!
Chikara4 years ago
you must make one of an actual joystick!!
russm3134 years ago
This was a GREAT instructable! I loved this so much, that I made my own. You can check it out here if you want.... Mine isn't as nice as yours, but it was a ton of fun to build. Thanks!
seamster (author)  russm3134 years ago
I'm impressed with your lamp! I love to see others try out my ideas. I'm glad you made one. I really liked the nintendo arcade set-up you made. ...Although all that electronic stuff scares me to death. Wiring a lamp is about all I've ever done!
deathshells5 years ago
WOW THIS LOOKS AMAZING! gotta build this when i get the parts ATARI FOR THE WIN!
punkrules5 years ago
this is really awesome. too bad i'm not so great at projects like this or i would make one for myself.
radiorental5 years ago
Hmmm, I was sure you would have made the final 10. Ho hum )o;
Metsker5 years ago
is there any full list of what thickness MDF you used in each step?
seamster (author)  Metsker5 years ago
Not a complete list, but I mentioned in various photo notes some of the thicknesses. For convenience though, here they are: Top and bottom pieces: 1/2" Sides: main piece was 3/4", with 1/4" piece glued to it Corner blocks: 1 1/2" square (made from two 3/4" pieces) Stick: 3/4" Raised ring: 1/8" (hardboard, like masonite) Three rings: 1/2", 3/4", and 3/4" plus 1/4" (to make the tallest ring 1") Stick collar: 3/4" (two rings to make 1 1/2" collar) I bought one 2 by 4 foot panel of each of these thicknesses of material and probably had enough left over to build at least one more of these.
A.J.B.5 years ago
That is the most awesome lamp/art piece that I think I have ever seen. Kudos!
Bravo! That's amazing. Excellent craftsmanship! And great details!
bustedit5 years ago
Very nice, accurate copy of the original! How about an Atari paddle dimmer switch????
That is the perfect addition to this project a paddle controller dimmer switch, this keeps getting better and better!
This great!!! I love all things Atari.

I just bought some brand new Atari 2600 shaped USB joysticks from Legacy Engineering. Bought them back in October, took several months to come, but they are absolutely perfect, feel just like the original Atari 2600 joysticks, I've tried them with all of my PC games and with mame on my iMac - love em!

check them out: http://www.legacyengineer.com

Now somebody needs to come out with an Atari 5200 joystick! :-)

AtariAge5 years ago
Great project, I love the attention to detail! And trust me, I've seen more than my fair of Atari CX-40 joysticks! I just posted this up as news on AtariAge.com. :)
seamster (author)  AtariAge5 years ago
Sweet! So I guess you don't mind that I "borrowed" some images to make my lampshade?
Nope! Although I wouldn't object to a link to AtariAge in that step. :)
that's awesome! it's like an i-spy books, very discreet but cool.
cincygeek5 years ago
Great work, awesome detail! You get my vote! I've got an odd piece of wood trim glue to a door (long story) that I've been trying to figure out how to cut, and I realize now that what I need is a Japanese pull saw! Thanks for the tip. One can never have too many tools (isn't that why we do projects, an excuse to buy more tools?).
slimguy3795 years ago
awesome alot of work, im wanna build one for myself.
ElChick5 years ago
I am absolutely astounded and flabbergasted!! This is one of the most detailed and lovely projects I have ever seen!! I love the nostalgia and the craftmanship that went into it. My hat is off to you!
The only *tiny* gripe I have is that while I love the subtle humor in the notes on the pictures, and the inventiveness of the jury-rigged jigs, the small plugs about how you could do better with nicer tools got a little old after a while.
I still gave 5 stars, favorited, and voted for you tho! Congrats on a beautiful piece of work!!! (8O])
seamster (author)  ElChick5 years ago
Thank you for the vote and the five stars. I'm glad you noticed my silly jokes!
I am in awe of the amount of work this took to produce. I'm guessing you don't have a second one for the other table at the end of the couch...? :) These must also weigh a TON. It would be great if lighter versions were available for purchase.
seamster (author)  The_Harbinger5 years ago
Surprisingly, it doesn't weigh as much as I thought it would. It's about 10 pounds.
askjerry5 years ago
This is an awesome project!

I have a shopsmith and a laser cutter... and I have NEVER made anything remotely this kool! OUTSTANDING job! Your use of jigs and thinking out each step... that's fine woodworking and planning. Again... OUTSTANDING!

Jerry
jongscx5 years ago
Did you HAVE to use wood for the stick? methinks that some sort of pipe would have been easier? In any case, ridiculously awesome work. Are you working on a an NES lamp now?
1-40 of 70Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!