Print PDF
Favorite
Email
Step 12Bottom of base
The bottom outside edge of the base was rounded over with the router, and sanded smooth.
The bottom panel was cut from 1/2 inch MDF, with 1/4 inch circles glued on to it. To attach this to the base, I added cleats to the inside made of 1/2 MDF.
The bottom panel was cut from 1/2 inch MDF, with 1/4 inch circles glued on to it. To attach this to the base, I added cleats to the inside made of 1/2 MDF.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
