Introduction: Atari Punk Console

By

This is my Version of the Atari Punk Console! I used the Schematic of Make Magazine (http://blog.makezine.com/2011/09/13/collins-lab-atari-punk-console/). It´s running fine at 9V.

Parts used in this APC:
- 1x NE556 Dual Timer Chip
- 1x Switch
- 1x Power Jack (2.1 mm)
- 1x Audio Jack (3.5 mm, mono)
- 2x Potentiometers 1MΩ (6mm)
- 2x Knobs (6mm)
- 1x 1kΩ Resistor
- 1x 10kΩ Resistor
- 1x 4.7kΩ Resistor
- 2x 100nF Ceramic Capacitor
- 1x 1uF Electrolytic Capacitor

For more Information, comment this post!