Instructables

Autocad Inventor 2011- How to make a widget

Step 13: New Sketch 2

Picture of New Sketch 2
a.PNG
Capture.PNG
b.PNG
fin.PNG
1. Click on "Create New 2D Sketch"
2. Click on the Large face. (Picture 2)
3. Click on the Front face of the "3D View Cube"
4. Click on the "Arc" tool.
5. Click on the points from Picture 5.
6. Continue till you have four like mine.
7. Finish
 
Remove these adsRemove these ads by Signing Up