With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I will attempt to teach you how to make a wheel axle in Inventor 2011 Pro. You will see my start to finish description on almost everything. I will sh...
1. You may work better playing some of your favorite tunes or genre on your pc, ipod, or any other sound device. 2. If you don't get something reread ...
You will need to get to know the program. Follow the pictures bellow to see what each button does.
Q's and A's ---------------------- Q: Ok what is a widget? A: There is no one thing called a widget. The term is used generically like gadget or gizmo...
You can find the video on Vimeo if this doesn't work for you. http://vimeo.com/18243507 Quick Dimensions: All Fillets are 0.125 ...
First you will want to watch the first part of the video from Step 3 if you could so you have a much better idea on what you are making. Otherwise t...
This is the Orthographic layout of what we will be making.
1. Create a new Part. At the top it should say Part1. In the Middle it shows an orange dot. That happens to be the origin. 2. Click on the "Circl...
The First image is what you should have currently. 1. Now that you have your circle you will want to click on the "Extrude" button in the toolbar. ...
Intrude is the "Extrude" just using "Direction 2" 1. Click on "Create 2D Sketch" 2. Then click on the front-most face. 3. Then click on the "Front" f...
Intrude is the "Extrude" just using "Direction 2" 1. Click the Corner as shown on the first picture from the "3D View Cube". 2. Click on the "Extrud...
This is the easiest one! 1. Click on the "Thread" tool. 2. Click on the Small cut-out. 3. Click "OK".
1. Click on the "Fillet" tool. 2. Click on the small circle's ring. 3. Enter "0.125 in" if your number is different. 4. Click "OK"
1. Click on "Create New 2D Sketch" 2. Click on the Large face. (Picture 2) 3. Click on the Front face of the "3D View Cube" 4. Click on the "Arc" tool...
Intrude is the "Extrude" just using "Direction 2" 1. Click the "Extrusion" tool. 2. Click on all 4 Arc interiors. (Picture 2) 3. Extends: Distance, 1...
1. Select the "Chamfer" tool. 2. Click on the remaining arcs 3. Leave "Chamfer" at "0.125 in". 4. Hit "OK"
1. Change the view so you can see the back. 2. Create a new 2d sketch on the back face. 3. Make a circle that is "2" from the origin as the center poi...
1. Select "Extrude" tool and select outer face. 2. Change to "Join" 3. Set Distance to "1 in" 4. Hit "OK"
1. Create a "0.75" inch circle from the origin as the center. 2. At the top of the circle make a line that is "0.1" inches down. 3. Make a line from t...
1. Select the Extrusion tool. 2. Click on the sketch you just made. 3. Set distance to "0.75", "Cut", and Distance 2. 4.Click "OK"
1. Select the Chamfer tool 2. Click the edge of the extrude (see Picture 1 and caption) 3. Click "OK"
1. Select the Fillet tool. 2. Click on the two edges as shown in Picture 1. 3. Fillet them with a radius of "0.125" in. 4. Hit "OK"
1. Select the Fillet tool. 2. Turn the "3d View Cube" to view the main corner. top/right/front. 3. Fillet the joint in the two cylinders. SEE PICTURE ...
1. Click middle mouse button twice. 2. Choose the "View" tab in the tool bar. 3. Choose "Visual Style" 4. Select "realistic"
The two files are different because i made the video before I made the written one. http://www.4shared.com/file/BBznhHel/Video_Tutorial_File.html ht...
Hello again! I would just like to say thanks again for reading or watching this tutorial. I am hoping that you can take the information from this tuto...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »