Introduction: Automatic Fidget Spinner

Picture of Automatic Fidget Spinner

All required supplies

  • Six 5v batteries
  • Two pieces of construction paper
  • Eight inches of wire tape
  • Small motor
  • Four toothpicks
  • Switch or Button
  • Paper or cardboard platform
  • Tape
  • Hot glue gun

Step 1: Making the Paper Fidget Spinner

Picture of Making the Paper Fidget Spinner

When making the fidget spinner you can do it many different ways. The fidget spinner has no certain design so you can make any type or kind you would like. So this step is all up to you on how you would like to do it.

Step 2: Placing the Wire Tape

Picture of Placing the Wire Tape

Step 3: Placing Motor and Platform

Picture of Placing Motor and Platform

  • First, you're going to want to put toothpicks on the outside of the motor and tape them.
  • Second, you're going to holt glue them the platform securely.

Step 4: Hooking Up the Motor

Picture of Hooking Up the Motor

You're going to tape the black wire onto the right side long piece of wire tape.

Step 5: Placing the Switch

Picture of Placing the Switch

Place the switch at the bottom of platform and tape both ends to each side of the wire tape securely.

Step 6: Placing Fidget Spinner on Motor

Picture of Placing Fidget Spinner on Motor

You are going to want to tape the bottom of the Fidget Spinner to the top of the motor. (most motors come with wheel for top of the motor)

Step 7: Setting Up the Battery's

Picture of Setting Up the Battery's

Tape all 6 5v batteries together.

Step 8: Enjoying Your Automatic Fidget Spinner

Picture of Enjoying Your Automatic Fidget Spinner

Put the battery on top of the left side of the wiretap and the wire to the motor top and hold the button for joy!

Comments

DIY Hacks and How Tos (author)2017-10-15

Fun variation on the fidget spinner.

About This Instructable

188views

2favorites

License:

Add instructable to: